DYNAFLEX 600 THINSET[50 lb. bag] GREY at  2600JMD/bag  for interior and exterior installation of ceramic tile, porcelain stoneware, natural stone, quarry tile, pavers and brick except light colored or translucent stone and glass tile. . WHAT'S APP 18765818120

LIMITATIONS

1.Install only at temperatures between 4°C and 35°C (40°F and 95°F).

2. Do not use for moisture-sensitive stone (green marble, most agglomerates, resin-backed tiles, some limestone and granite tiles). Instead, use a suitable epoxy or urethane adhesive.

3. Do not use over dimensionally unstable substrates such as hardwood floors, oriented strand board (OSB), substrates containing asbestos, luan, Masonite® or metal. To use directly over gypsum-based patching or leveling substrates, apply suitable primer before use.

4. Use a white mortar when installing light colored or translucent stone and glass tile.

 5. Installations of tile over nonporous surfaces (waterproofing membranes, sheet membranes, existing tile, etc.) will require extended setting and curing times.

6. Installation of large format tiles will require extended setting and curing times.

7. For veneer installations using this product, consult local building code requirements regarding limitations and installation system specifications.

8. Surfaces must be structurally sound and stable to support ceramic/stone tile, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations.